Revology Cars specializes in re-engineering iconic 1967–1970 Mustangs and 1967-1968 Shelby GTs, blending heritage design with modern engineering. Since 2014, cars are typically built around an original donor Mustang while the vehicles themselves are built from all-new steel panels, carefully assembled components, and calibrated systems that enhance rigidity, reduce NVH, and improve driving comfort compared to the original cars.
Revology applies precision assembly techniques, including spot welding, structural adhesives, and controlled manufacturing processes, to ensure consistency, durability, and quality across each build.
This blog explains how Revology conducts detailed inspections and calibrations for each GT350 before delivery, ensuring reliable performance, smooth handling, and a refined driving experience while staying true to the classic Mustang and Shelby heritage.
Pre-Delivery Inspection Protocol: Ensuring Every Component Meets Factory Standards
Before delivery, every GT350 undergoes thorough checks and evaluations, ensuring each car is fully prepared, inspected, and ready for performance.
Systematic Build Quality Checks
Each GT350 undergoes structured production line inspections for appearance and functionality. Systems such as windows and doors are tested for reliability, and any defects are logged in Revology’s quality tracking system for review and corrective action.
Dimensional and Structural Verification
Every GT350 unibody is verified for dimensional accuracy. CAD fixtures and adaptive spot welders ensure precise welds, tight tolerances, and enhanced structural rigidity, meeting Revology’s high-quality standards.
Engine Installation and Calibration Verification: Confirming Coyote Ti-VCT Integrity
Once accessories and components are installed, engines are prepared for performance checks, ensuring all components are correctly installed and ready for detailed evaluation.
Torque and Component Verification
Each GT350 engine undergoes detailed torque specification checks for all fasteners and critical components. The Coyote Ti-VCT V8 used by Revology is assembled by Ford with precise attention to component compatibility, ensuring each part meets Revology’s standards for reliability and performance, and comes with a warranty.
ECU and Calibration Validation
Gen 4 PCM calibration along with the type of transmission (T-56XL 6-speed manual or 10R80 10-speed automatic) is validated to optimize engine performance. Sensors, wiring harnesses, and control modules are tested for accurate communication and system synchronization, ensuring the engine responds as intended under all operating conditions.
Are Revology GT350 engines built with modern components or original parts?
Every GT350 engine uses a Ford Coyote Ti-VCT V8 assembled with all-new, OE-grade components and calibrated to Revology’s own engineering specifications for performance, reliability, and drivability.
Oil and Cooling System Assessment: Maintaining Thermal Stability and Efficiency
Vehicles are prepared for thermal testing, ensuring cooling and lubrication systems are ready for operational verification.
Radiator Verification
Each GT350 undergoes checks to ensure the radiator and cooling system function correctly. Fluid flow, pressure, and temperature are monitored to prevent heat soak and maintain consistent thermal performance under all operating conditions.
Temperature Monitoring and Heat Management
Engine oil and coolant temperatures are closely tracked during testing. Any anomalies are addressed through system adjustments to ensure long-term reliability, efficiency, and optimal engine performance before delivery.
Drivetrain and Transmission Evaluation: Smooth Power Delivery and Torque Management
Before the first drive, drivetrain components are checked for readiness to ensure smooth testing on the road and track.
Transmission and Clutch Testing
Each GT350’s Tremec T-56XL 6-speed manual transmission is tested for smooth gear shifts and precise clutch engagement. Engineers verify torque transfer and drivetrain responsiveness to ensure reliable performance across all speeds and conditions.
Differential and Driveshaft Verification
The rear Traction-Lok limited slip differential is evaluated for rotational balance and driveline noise. Driveshaft and differential performance are monitored under load to confirm torque distribution meets Revology’s strict quality and NVH standards.
Brake, Steering, and Handling Validation: Optimizing Control and Driver Feedback
Braking and steering systems are carefully evaluated to ensure each GT350 delivers precise control, confidence, and refined driver feedback.
Brake System Bed-In
Each GT350 is fitted with high-capacity ventilated rotors and multi-piston calipers. Brakes are tested for pedal feel, bias, fade resistance, and consistent stopping power under various conditions. These evaluations confirm the system provides safe, responsive performance on both road and track.
Steering and Suspension Performance
The front double-wishbone and rear three-link suspension are tested for alignment, camber, caster, and toe settings. Steering precision, NVH control, and ride quality are verified to ensure balanced handling, consistent response, and driver confidence during spirited driving.
Are braking and suspension systems upgraded?
All braking, steering, and suspension components are validated for performance, comfort, and reliability. Revology ensures each GT350 meets modern handling expectations while maintaining the classic Mustang and Shelby driving experience.
Suspension and Chassis Calibration: Balancing Rigidity, Ride Quality, and NVH Performance
The chassis and suspension are set up to ensure that every vehicle is ready for calibration and testing.
Chassis Structural Verification
Each GT350’s all-steel unibody is checked for dimensional accuracy and weld integrity. Structural adhesives and CAD-guided fixtures ensure consistent rigidity and precise mounting points for subframes and suspension components.
Suspension Geometry and Ride Tuning
Suspension components are carefully adjusted to achieve optimal handling, ride quality, and NVH performance for both road and track conditions.
Electrical Systems and Diagnostics: Modern Reliability Across All Modules
Electrical systems are checked to ensure every GT350 is ready for detailed inspection and testing across all modules.
Wiring and Module Verification
Each GT350 undergoes thorough inspection of wiring harnesses, fuse panels, and electronic modules. Engineers confirm proper connectivity, sensor operation, and fail-safe functionality to ensure reliable vehicle operation under all conditions.
ECU Calibration and Diagnostics
The Coyote PCM and all electronic control units are validated for accurate calibration and module communication. Firmware updates and diagnostics are applied as needed to guarantee throttle response and data acquisition systems perform to Revology standards.
Exhaust Verification: Performance, Sound, and Durability Checked
Exhaust Component Assessment
Exhaust systems are reviewed to ensure each GT350 is ready for performance evaluation and sound validation. Each GT350’s headers, mufflers, and exhaust routing are inspected for proper fit, flow, and sound output. Engineers confirm clearance, durability, and consistent performance under various operating conditions.
Exhaust Performance and Durability Testing
Each GT350’s exhaust system is tested for tone, flow efficiency, and overall durability under load to ensure reliable operation and a refined driving experience before delivery.
Road and Track Performance Testing: Real-World Validation Across Conditions
Road and track trials verify that each GT350 delivers stable handling, precise performance, and reliable operation in diverse driving conditions.
Multi-Condition Road Testing
Each GT350 is evaluated on a variety of road surfaces to validate acceleration, braking, handling, and ride quality.
High-Speed and Track Simulation
High-speed stability and simulated track testing ensure the GT350 maintains control, balance, and thermal stability under demanding conditions. Vehicle performance is verified for both street and spirited driving, emphasizing driver confidence and reliability.
Interior, Build Quality, and Final Handover: Driver-Focused Ergonomics and Finish Excellence
To ensure a refined delivery, Revology inspects each GT350’s cabin and finishes for driver readiness.
Driver-Focused Cabin Verification
Each GT350 interior is checked for ergonomic layout, seating, controls, and instrumentation. HVAC, audio, and cockpit functionality are validated to ensure comfort and usability for street and spirited driving.
Final Fit and Cosmetic Inspection
Paint quality, panel fitment, trim, fasteners, and overall finish are thoroughly inspected to meet Revology’s high standards. Customer specifications are confirmed, and all documentation is prepared for a smooth and precise delivery experience.
Final Assurance: Every GT350 Delivered to Revology Standards
Each GT350 receives a final review to confirm it meets Revology’s exacting standards before delivery.
A Benchmark in Modern Shelby Performance
Every GT350 leaving Revology undergoes thorough inspections, testing, and calibration to ensure proper function, structural integrity, and reliable performance. Combining classic Shelby design cues with careful modern engineering, each car delivers precise handling, calibrated powertrain performance, and refined ergonomics, reflecting Revology’s own commitment to quality and readiness for delivery.
Revology’s Commitment to Quality and Performance: GT350
Through OEM-level engineering, detailed inspections, and rigorous testing, each vehicle combines Shelby-inspired design cues with modern precision, delivering a fully engineered and finished driving experience for enthusiasts and collectors alike.
If you’re looking for a GT350 that blends vintage charm with today’s engineering, explore Revology’s full lineup and find your perfect Mustang built to Revology’s exacting standards.
Frequently Asked Questions
Are Revology GT350s built using all-new components?
Revology starts with an original donor Mustang, which is how each car is titled, then builds the unibody using all-new steel panels assembled in-house, paired with OE-grade components following its own OEM-inspired engineering and manufacturing processes.
How does Revology maintain high quality and consistency?
Each car undergoes structured production line checks. Any defects are logged in an online quality-tracking system, root causes are investigated, and long-term countermeasures are implemented.
Can I register my Revology GT350 like a classic car?
Yes. Revology titles its GTs and Mustangs as “restored originals,” allowing registration similar to classic Mustangs.
What kind of warranty does Revology offer?
Revology provides a “1‑2‑5” warranty: 1 year bumper-to-bumper, 2 years on the powertrain, and 5 years on the steel body.
How much freedom do I have to customize my GT350?
When ordering, you can choose colors, trim, and option packages according to Revology’s order process.